Fe-Pi Audio V1

Fe-Pi Audio V1

There are only 2 items left in stock.

The Fe-Pi Audio V1 is designed to provide a complete low cost audio solution for Raspberry Pi 2, 3, 4, and Zero, needing line-in, line-out, headphone-out/mic-in, and stereo speakers.

SPI, UART, and I2C 2.54mm(.100) breakout pads are available for external use. 

Raspberry Pi 2, 3 PCB footprint.

SGTL5000 low power stereo codec.

3.5 mm, 4 contact, jack for Headphone/MIC (black).

RCA jacks for stereo Line In, and Line Out.

4 pin screw terminal for Speaker Out.

At minimum, 3 Amp power supply is recommended for the Raspberry Pi, if speakers are used! 

ADC > 90 dB SNR and -72 dB THD+N

Line-Out > 100 dB SNR and -85 dB THD+N

HP Output > 100 dB SNR and -80 dB THD+N, 62.5 mW max into 16 ohm.

Speaker Output > 1.4W per channel, into 8 ohms.

Hardware level controls for Headphone Volume, Line In, Line Out. ALSA support.

2x20pin 2.54mm female header included!

Setup and Support can be found here.